1 - SAILING PERFORMANCE AND HULL DESIGN
I arrived a week ago from my sailing season and one of the interesting sail moments of this season was, when offshore Itaka, beating against the wind, I had the pleasure of catching and leave behind a 60ft modern cruising sailboat, with my 41 ft cruising sailboat. It was a 7-10 year old design, one of those that at the time big brands started to put on the market, with sleeker lines and a better built than their smaller models, a line that several of them call Yacht line. Newer models would be slower. They tend do be fatter, with more beam, less ballast and larger bow entries, to maximize volume, and the space on the front cabin.
|
On top, 2024 Dufour 44: beam 4.45m, B/D 28%. Below, 2003 Dufour 44/45P: beam 4.25m, B/D 33%.
|
From the point I catch them to the beginning of the bay that gives entrance to Vathy natural port, passed about an hour, maybe a bit more, and they were already just a tiny spot on the horizon. I sail without a wind instrument, so I cannot tell exactly wind force, but I would say 15 knots. They sailed with all the sail out, I had the main on the second reef and the 135% genoa furled to 110%.
Yes, I could had more sail out, if I was sailing with a crew (like the big boat was - they were 4 crewing the boat, not counting wives and I was sailing just with my wife), but on the Med this year's season has been complicated, with a lot of strong winds, big gusts and squalls, and my wife, that is not a sailor (even if she provides me with some help) was permanently nervous about the weather, and to make her more comfortable, this year I chose to sail in a more sedate way, with the boat far from its limits.
|
Dufour 44/45 Performance |
The difference in speed with all the sail my boat could carry at that moment would not be much, maybe half a knot, and sailing with less sail allows me to reef less times and sail with less heel, besides at the limit my boat, that is what was called a cruiser-racer, and now tend to be called a performance cruiser, becomes more nervous, and it demands constant small rudder and sail adjustment, that are tiring when the boat is basically solo sailed.
|
2006 Comet 41s |
We cruise on a Comet 41s, a 18 year old design. You can have a better idea about the boat reading this sail test on the link, but I would say that even if offering better and more comfortable interiors, the hull design and performances are something in between the ones of the First 40 and a J122e.
https://www.yachtsandyachting.co.uk/equipment/boat-tests/comet-41s-review/In what regards cruising and sailing upwind, this type of hull, has not only advantages:
|
Above, 2024 Dufour 44, below, 2003 Dufour 44 performance. |
Sure, it points 7 to 10 degrees better than most cruisers, and 15 degrees (or more) better than a cruising cat, at the same angle slams much less than a typical modern cruising boat, and it has a better weight/power relation. All this makes it much faster upwind, but it also sails with considerable more heel. I would say about more 7 to10 degrees. It has to heel more to transform in power the difference in B/D and draft (bigger B/D bigger draft) that it has over a mass production cruiser main market cruiser.
Heel is an inconvenience mostly when you are inside the boat and have to prepare some food, or when you want to use the toilet. Sure, it is not difficult to diminish heel upwind, you just have to point more to the wind, reducing the 7.5 knot speed to something like 5.5kt, but you are losing time and we rarely do it, except momentarily, because we mostly sail in small 5 to 12 hours trips, and have time for a proper meal on arrival.
When we sail upwind with medium winds, my wife, who is 73 years old, has some trouble going inside and preparing some snacks with the boat heeled, so it's me, that on those conditions, go inside and prepare a snack for lunch.
|
2024 Dufour 44, below 2003 Dufour 44P
|
To be honest, if somebody is prone to get seasick, going fast upwind with waves can increase the problem. If you are pushing the boat against wind and waves, exploring all performance the boat has to offer, because it points much better and it is faster than a main market cruiser, it takes waves more on the bow and in a more violent way (due to the extra speed), and even if the boat is not slamming due to finer entries, that is translated in a more violent motion, specially in the med, where the waves have a very short period.
We can say that I could go at the same angle as a main market cruising boat and reduce sail to go at the same speed, in that case this boat would be way more comfortable, but the ones that like to sail a performance boat don't do that, they enjoy going as fast as possible, and that includes pointing higher and sailing faster than main market cruising boats.
|
Above 2024 Dufour 44, below 2003 Dufour 44 Performance. |
In what regards seasickness there are the ones that are more sensitive to big ample slow movements (and in this case there is no problem with my type of boat) and the ones that get more seasick with faster jerking movements. Unfortunately my wife gets worse with this type of movements, that become worse when I go fast upwind with waves, as close to the wind as to get the better performance.
Fortunately this year she found some kind of natural pill against seasickness and things have become much better.
Back to comparative performance, it was not the only time we have caught and out-sailed cruising sailboats 50ft and over, in fact it happens several times every year, due to the Med being a place with a huge number of sailboats, and it is not only upwind, but also in winds between 5-12 knots, in all points of sail, and smaller cruisers are even easier to out-sail.
|
2003 Dufour 44 Performance Tom Tom Laferla
On a parallel story, and because I chose pictures from two different Dufour 44, one from 2003 and other from 2024, some will be asking themselves what is the fastest boat: the newer or the beamier one with a big transom, or the old one, with an "old" designed transom, and the question makes some sense, because the displacements are not very different, 10200kg for the new boat and 10114kg for the 21 year old design. Well, the old design would be faster in all points of sail and conditions and much, much faster, if we consider overall conditions, and not only downwind sailing. I will talk more ahead of sailboat performance on the Midlle Sea race, that is a good place to access the performance of different types of hulls in med conditions, and you should know that a slightly modified Dufour 44p, Tom Tom Laferla is an usual competitor. This year they abandoned the race very early, but last year they were the 2nd 45ft performance cruiser to finish the race, behind the modified First 45 Elusive, if we do not count as performance cruisers boats much more designed for racing than cruising, like the JPK 11.80 or the Sydney 43RS, that arrived slightly ahead. In 2020 this Dufour 44 won the class (IRC5) and was 3rd overall in this race. If a modern Dufour 44 made this race, it would finish it among the last boats to arrive. |
Curiously my wife that does not particularly like sailing fast, loves to catch and out sail big boats, and on those occasions she even participates actively in the boat fine tuning. Well, women are difficult to understand. If she likes that why doesn't she like to sail fast all the time and keeps asking me to reef the sails? I guess she is always afraid that stronger winds appear and we need to reef. That is not a problem for me, but she hates being at the helm while I reef the boat, even if it is the easiest part.
Several times while beating and tacking against the wind we noticed that we where doing the same VMG as sailboats that were motoring directly against the wind and waves, and many times we were faster sailing, than those boats motoring.
For giving you an idea I remember a 48ft Oceanis that we over sailed, also upwind but with weaker winds (maybe 8-9 kt), they with all the sail up, us just with the genoa.
We both overtook easily a Jeanneau 410 with a reef on the main (god knows why), that rapidly stayed behind. We where sailing at about the same speed and were going to the same port,as we later found out. The bigger boat stayed rapidly behind when both boats tacked. Even only with the genoa the Comet could point much better than the Oceanis (I was sailing only with the genoa because we where going to a port 10 miles away, and it did not deserved the trouble to put the main out, and most of all, to store it again in the bag).
|
Sure, this boat is equipped with all performance extras that Dufour offered as options, and it has a custom bowsprit, but it is has the same hull as a standard 2003 Dufour 44 P. |
From performance while racing I could give you many more exemples where older designs, with the transoms with all the beam not all pulled back, have outsailed more modern sailboats with what is called modern transoms (all the beam pulled back). These examples were taken from main IRC races where the crews are all competent, not to say good.
For two decades I have been comparing the performance of different types of hulls while racing on major races and I have made some posts about the subject (links below).
For instance, last year on the Middle Sea Race I was truly impressed by the performance of a 23 old design, a J125, very narrow, lots of ballast. They didn't even got a good result in IRC due to a very high rating, but they out sailed a Mat 1220, a modern and very fast racing boat and outsailed the fastest of the JPK 11.80.
This year, on the same offshore race that had typical med conditions, with lots of wind, medium winds, very weak winds, sudden squalls and types of sailing positions, I saw again huge beam performance cruisers (two Pogo 36, a Pogo 44 and a RM 1360) not doing well, being overall, slow.
|
Above the 27 year old J125 Below, the new Matt 1220 |
Regarding cruiser racers, the most impressive performance comes from a Sydney 43 GTS (4.2m beam), an Australian boat that I love and that for a short period was manufactured by Salona for Europe, without sales success. Its performance on this race is very good and he finished the race on the tail of a racing Volvo 70, leaving behind all racing class 40 and the Rapido 53XS, one of the fastest performance cruisers trimarans.
|
Matt 1220, beam 3.96m |
The Sydney 43 is a 13-year-old design and the only one (among older designs) that has all the beam pulled back, but with very characteristic and particular aft sections, that Ker (the designer) was the first to develop, and that later were adopted by Poli, the designer of many Italia Yachts, and now Grand Soleil, that use a somewhat similar transom design.
|
13 year old designed Sydney 43GTS, 4.20m beam |
The Sydney 43GTS won in IRC Class 3, also arriving first in real time and being the first 43ft to arrive, beating all racing boats of that size, or slightly smaller. The Sydney performance puts a bit on the shadow the very good performance of another cruiser-racer, a Neo 430 (4.1m beam), that arrived on the next group of boats.
|
Above, Pogo 44 - beam: 4.50m |
Behind the Neo came two ICE 52RS (4.65m beam, a very fast performance cruiser), an then an incredibly fast racing Elliot 35ss (3.5m beam) and quite incredibly the old modified First 45 (4.2m beam) , that left behind an old Farr 45 racing boat (4.2m beam) and a super fast cruiser racer, a ClubSwan 42 (3.9m beam) and at some distance a new First 53 performance cruiser (5,0m beam).
|
Note that even if the Pogo has a much bigger beam, seen from above, transoms seem similar, both with the max beam pulled aft, but when we look at the aft hull sections, we can see that they are hugely different, with Sydney transom allowing the hull to heel without increasing drag, allowing for a better performance upwind, while the Pogos' one limits heeling providing a more stable boat downwind and providing a more efficient autopilot use. |
The Clubswan 42, a 19-year-old design, was 3rd in IRC 3, arrived not far from the First 45 and ahead of the First 53 and was only beaten in real time by five cruiser-racers, all bigger the Sydney 43 GTS, a NEO 430, two ICE 52 and the modified First 45. From them, the Sydney and the ClubSwan are more pointed to racing, while all the others are what we can call performance cruisers.
It is interesting to point out that in real time the all carbon NEO 430, that made a good race (was 5th in IRC Class 3 and arrived in real time in 3rd) was only 3 hours and a half faster than the older Clubswan 42 in a 113 hours race, and the NEO 430 is a full carbon boat and the Swan 42 has only spars in carbon.
The 27-year-old J125, that had impressed me last year, was also very fast, and if we take out the 2 hours (redress time given in compensated) that lost while helping the crew of a damaged boat, they would have arrived practically at the same time as the bigger 16-year-old designed First 45, that made a fantastic race.
Mention also for an 19-year-old designed Comet 45s (4.2m beam, the big sister of my boat) that, before losing much time with damaged sails? was ahead of the new First 53, and chasing the also old and modified, First 45 the one that won the IRC class 4. It would also won in real time, arriving 3 hours before the First 53 that was second.
|
Above, First 45, below First 53, even if they are not comparable due to the different in sizes, the First 53 is beamier boat (5.0m to 4.2m). |
The next boat, to arrive, quite incredibly, was a 30-year-old designed Farr 30 (3.1m beam) with a relatively narrow transom that won IRC class 5 and that left the duo sailed First 36 almost 5 hours behind and the Sunfast 3300 that won class 6 at more than 13 hours. We may also point out that a J112e was only 3 hour slower than the First 36 and 7 hours and a half faster than the first of several Sunfast 3300.
Regarding very beamy performance cruisers versus narrow performance cruisers it is worth pointing out that the J112e was 19 hours faster than the Pogo 44, 24 hours faster than the RM1360, and 25 hours faster than the Pogo 36. A mention to the First 36, that won in two handed, that was 3 hours faster than the J112e, showing good potential for two handed racing.
|
Above First 36, beam:3.80m Below, Pogo 36, beam: 4.00m |
The First 36, that is narrower than the Pogo 36 ( 3.80m to 4.00m beam) made a great race showing a much better racing potential for duo racing than all Pogo 36 that I have seen competing in this race, but it was only 6th overall in IRC class 5. I have seen in other occasions on top races JPK and Jboats winning not only the duo handed race but also the class, and even one time being 1st overall in IRC.
Without taking the merit of the very good First 36 performance I cannot wait to see it racing against top duo or crewed JPK 10.80, that unfortunately did not happen in this race, being the competition less numerous and weaker than usual. The next fast boat in the 2handed class was a Sunfast 3300 (3rd) that was only 9th in IRC class 6.
|
Above, J112e, beam: 3.60m
|
Here you can find posts about the performance of beamier, versus narrower performance cruisers:
https://interestingsailboats.blogspot.com/2023/01/2023-dusseldorf-first-36-pogo-36-j112e.html
https://interestingsailboats.blogspot.com/2017/11/j112e-beautifull-nimble-fast-cruiser.html
|
Above Dehler 30, beam: 3.28m
|
https://interestingsailboats.blogspot.com/2017/01/european-performance-cruiser-of-2017.htmlhttps://interestingsailboats.blogspot.com/2020/03/pogo-becomes-more-comfortable-pogo-44.html
https://interestingsailboats.blogspot.com/2021/02/grand-soleil-44-versus-pogo-44-and.html
|
Above, Farr 30, beam: 3.08m |
https://interestingsailboats.blogspot.com/2017/11/hull-designperformance-jboats-versus.htmlhttps://interestingsailboats.blogspot.com/2014/04/solo-racing-crewed-racing-hull-design.html
https://interestingsailboats.blogspot.com/2014/03/sam-manuard-on-design-of-performance.html
|
Above, Comet 45s, beam 4.20m The Comet 45s won the 2008 World ORC championship and in the 2020 Middle sea race,being duo sailed, made 2nd in IRC class 4. |
https://interestingsailboats.blogspot.com/2014/03/saphire-27-versus-seascape-27.htmlAmong racers, special mention for the fastest 50ft boat in this edition of the Middle Sea Race, the 9th boat in line honors and 1st overall in ORC, a Cookson 50, a 21-year-old design with a moderate beam (4.27m) and with the max beam not all pulled to the transom. In his racing career the Cookson 50 has won many races, not only as a class winner, but overall, and many when it was already an over 10-year-old design.
|
Above, ClubSwan 42, beam 3.93 m
|
Besides many victories in ORC (2017 World ORC championship) it won overall the Middle sea race in 2016, won overall the Fastnet two times, in 2007 and 2017, won overall the Sydney Hobart in 2013 and continues competitive in 2024, with podium places and even an overall victory in ORC, in this year's Middle Sea Race.
|
Above, Neo 430, beam 4.01 m, an all carbon cruiser racer that starts to win races but needs yet a major accomplishment. There is one being raced in Australia, maybe we can see it competing against the two J11.80 in the 2024 Sydney-Hobart. |
The Cookson 50, that I would not call a cruiser-racer, but that can be used for cruising (it has a spartan but funcional cruising interior) arrived just behind a group of three very fast 52ft modern racers (one of them won the race), two TP52 and a Botin 56, and left behind a Botin 52, an Infinity 52, and way behind and far away, two Volvos 65, one Volvo 70 and another TP52, not to mention many other bigger racers because it was the 7th boat to finish the race.
|
ClubSwan 50, beam: 4.20m |
Even in compensated the Cookson 50, a 21-year -old design, has done well, finishing the race in 3rd in IRC and winning in ORC.
Looking at this year's edition of the Middle Sea Race, and at the results, boat's performances and hull shapes, we can confirm that what we observed here has happened already in some other editions, showing that many times older designs, narrower boats, with not all the beam pulled back, offer a better performance than more "modern" designs, and that hugely beamy boats do not perform well on this particular race, that is probably the one that better replicates Med conditions.
|
21 year old Cookson 50, beam: 4.27m Below, a nice carbon interior. |
You can have more information regarding racing, type of hull and performance, on these posts:
https://interestingsailboats.blogspot.com/2022/03/hull-shape-bd-and-boats-performance.html
https://interestingsailboats.blogspot.com/2022/10/2022-middle-sea-race.html
|
Cookson 50 racing |
https://interestingsailboats.blogspot.com/2021/07/shape-of-hull-and-boat-performance.html
https://interestingsailboats.blogspot.com/2017/11/hull-designperformance-jboats-versus.html
https://interestingsailboats.blogspot.com/2020/10/2020-middle-sea-race-type-of-hulls-and.html
https://interestingsailboats.blogspot.com/2018/10/2018-middle-sea-race-update.html
https://interestingsailboats.blogspot.com/2014/10/20114-middle-sea-ra-look-at-comparative.html
https://interestingsailboats.blogspot.com/2014/04/looking-at-comparative-cruising-boats.html
Of course beam or type of transom are not the only dimensions that count in what regards monohull performance, the shape of the hull on the forward and aft parts is also important as well where max beam is located, B/D, draft, keel design and displacement are elements that are important to establish the relation between power and drag on a sailboat, that is very relevant for performance, and that can vary in different points of sail, different wind and sea conditions and heel angles.
|
Above, Neo 430 transom, below, ClubSwan 42 |
Because practically all contemporary designed racers have all the beam pulled back and a considerable beam, almost all think that a sailboat with all the max beam pulled back to the transom is faster than an older design with a smaller transom, and the thinking is mostly justified.
For racing, on most conditions having all the beam pulled back has advantages, but on some conditions (that can be in some places the more frequent ones), namely with weak wind and upwind, it has disadvantages.
So, why practically all racing boats use them? Because the time they can win downwind, and reaching in medium high to strong winds, vastly compensates the time they lose upwind.
The differences in speeds downwind and beam reaching, between the two types of hulls, are way bigger than the difference in speeds in weak wind or upwind (including pointing ability), so, in most conditions it compensates to have all the beam pulled back.
|
Pogo 12.50 a hull similar to the one on Pogo 44. Note that, even if, at the first look it seems similar to the NEO one, it is in fact very different. The NEO 430 photo does not help because it was taken with a wide angular lens, and distorts the shape, but notice that the transom is much more rounded, and the rounded part goes higher on the hull It is also interesting to look at the antifouling on the three hulls: the one of the Swan does not come till the transom, the one of the NEO does, but it is narrow there, while the one of the 40class racer is wider and occupies almost all the bottom. |
That bigger difference is due to an easier planing with a transom with the beam pulled back, and that means you can easily explore the boat's limits and potential, resulting in a several knots faster overall speed on those conditions. The stronger the wind, the bigger the difference in speed, except, of course upwind, were it is the opposite.
However this advantage even for racing does not regard all racing conditions, and particularly in offshore races on the Med (and other regions with similar wind conditions), where winds are varied in the direction and frequently weak, many times older designs perform better, and extremely beamy cruiser-racers or performance cruisers, like the Pogo, do not perform well, losing too much time upwind and in weaker wind conditions, while older designs like the J122e, the J112e or the First 45 perform better.
|
Above, Cookson 50, below TP52 (2018). As you can see the cookson transom is not very different from the ClubSwan42, and the one of the TP52 is not very different from the NEO 430 one. |
And we saw that on the Ocean Race, in the Mediterranean legs, the old VOR 65 were in most cases faster than the much beamier brand new flying 60ft IMOCAs, equipped with last generation foils.
https://interestingsailboats.blogspot.com/2021/06/why-are-new-imoca-slower-than-older-vor.html
Not all types of hulls with the beam pulled aft are the same and besides the obvious distinction between narrow, moderate and beamy boats, they can have very different designs on the aft hull sections that will provide different maximization of performances in different ways.
In offshore races where downwind and beam reaching in medium strong to strong winds are the norm, beamier boats with the beam all pulled back, have an advantage and we will see them shine while racing and not only in Transat races.
https://interestingsailboats.blogspot.com/2019/02/2019-caribbean-600.html
In what regards racing boats we can say that overall new designs are faster, even if there are racing conditions where older designs can perform better, and we can also find some very successful new designs that don't have all the beam pulled back.
The JPK 10.30, 10.80 and 11.80 or at the J112 and J99 , winners of many races and top performers in compensated and real time are good examples. All were designed in the last decade and some just some years back and none of them has the beam all pulled back.
|
On top the JPK 10.30, then theJ99 and below, JPK 11.80. They are all recent designs and winners of many races, winning not only in compensated time but being the first boat of that size finishing the race, beating much bigger sailboats. |
Regarding older designs performing sometimes better, all remember the Sydney Hobart huge battles between Wild Oats XI and Comanche, being Comanche at the time a newly designed boat, very advanced in design for its time, and 11 years younger than Wild Oats, that was a narrow boat while Comanche was a beamy boat and we all know that in most cases the performance was very close and that several times Wild Oats beat Comanche, even if Comanche also won the race several times.
Note that Comanche even if it was seen as a beamy racing boat at the time, is only moderately beamy, if we compare it with IMOCA designs, or modern main market designs.
Or you can look at the Cookson 50, the 21-year-old design, that I mentioned above due to the very good performance on this year's Middle Sea Race, where it finished 3rd overall (IRC) and won in ORC, but besides this victory in ORC, the Cookson 50, a Farr design from 2003, had won in 2007 and 2017 the Fastnet, in 2013 the Sydney Hobart and the Middle Sea race in 2016 and it is still a competitive racing sailboat, no matter being an old design.
(to be continued on another post about - Cruising advantages and disadvantages of different types of hulls.)