The More 55 was one of the boats that I was more curious to visit at the Dusseldorf boats show. I had done several posts about the More 55, accompanied the Atlantic crossing of several of them on the ARC, where one of the boats was very fast, being the others reasonably fast and with one of the them losing a rudder.
Regarding that rudder it seems that the problem was only with the rudder blade that delaminated and was gone, they say, after having hit something. All steel structure remained in place and they were able to repair it with some floor boards.
They also said that on the Caribbean they had hit a reef hard and that the boat had not sustained any damage on the keel structure. Fact is that the keel structure, a huge massive steel grid that, on Dusseldorf boatshow, was visible through a plexiglass that substituted the floor boards, is an impressive one.
They also said that on the Caribbean they had hit a reef hard and that the boat had not sustained any damage on the keel structure. Fact is that the keel structure, a huge massive steel grid that, on Dusseldorf boatshow, was visible through a plexiglass that substituted the floor boards, is an impressive one.
This is a new brand, owned by Swedish with boats built in Croatia, with the "savoir faire" of Salona, from where many workers have come, including at high level, over a very good design by Cossuti. An improbable and curious story that started when a charter company, specialized on the charter of performance boats (More charter, that used mainly Salona yachts), decided to build their own boat.
The More 55 offers a dinghy garage of good dimensions and an interior very similar in quality to what Salona used to offer, even the design and choice of woods is similar and that means a good quality interior.
Unfortunately the layout is far from being the best for a boat with those dimensions and the saloon has much space wasted. It has a galley all along one side and a seating area and table on the other, resulting on a large space unused between the two sections. Worst, that large space makes it difficult to use the galley at sea, since no body support is possible, at least in one of the tacks.
Three layouts are offered (all with the same saloon), two for charter and one for private ownership use, that one with a big forward cabin and a large sail locker that will provide the needed storage.
Three layouts are offered (all with the same saloon), two for charter and one for private ownership use, that one with a big forward cabin and a large sail locker that will provide the needed storage.
The big disappointment came when I was trying to understand what kind of core they use on the hull and after a lot of confusion they said to me that even if this is a vacuum infused boat, they use a monolithic hull. Hard to believe in all those claims that they make regarding a very stiff hull with great resistance against torsion with a single skin hull!!! It would help to explain how they manage to propose these boats at a very attractive price, being the one of the More 55 - 387 000 euros and the one of the new More 40 - 185 000 euros.
It would, but does not explain, because the boat, after all, and contrary to all information I received, has a sandwich hull!!! I am modifying this post after exchanging some emails with Leo Curin from Pulse Yacht design (that was an ex-Salona top technician). He has done the production management on the More 55 and now he is behind the Bavaria revolution, in what regards the building process that is new too, namely the boat structure.His firm developed also the interior layout.
The More 55 has a sandwich hull with PVC closed cell core except on the place were stainless frame is located and on the engine area as well. Other small areas are also monolithic as the areas where there will be high slamming loads. There, a high-density core is used in combination with single skin laminate. Single skin laminates are also used in areas of through-hull fittings.
Comparing the More 55 with a Jeanneau 54 we will see that the Jeanneau is almost 2T heavier and costs about the same. The Jeanneau has an infused balsa sandwich hull on the sides, a monolithic hull below the waterline with an interior "contre moule" as structure on the bottom. The More is a technologically more evolved boat, with a PVC core instead of balsa, a fully sandwich hull (except on highly stressed areas) and a big steel structure that takes the loads from the mast, shrouds and keel and transfers them efficiently to the hull. The only point where the Jeanneau 54 is better is on interior design.
Jeanneau 54 |
Regarding that rudder problem on the ARC Leo Curin says: "About the rudder, it was a big shock for us too, but when the boat was out on Carribean it was visible that the rudder was damaged, probably before start of ARC, rudder shaft is still here in the factory and the lower first angled bar was twisted in one side, probably damaged in some marina on the way from Croatia to Las Palmas, thus the blade was opened and it was just delaminating during regatta, by the way all rudders are produced on duplex shaft, blade is made with epoxy and glass/carbon fibres, when closed filled with epoxy foam 170kg/m3 (not PU), front edge overlaminated before fairing, better than we did in Salona".
So, bottom point, the MORE 55 is not too good to be true....it is just a great boat at an incredible price. I certainly would prefer it to the Jeanneau 54: much more boat for the money even if I would have a big difficulty convincing my wife. The Jeanneau has just a better designed interior and even if the quality of the one on the Moore is as good or even better, the comfort, functionality and coziness has no comparison.
http://interestingsailboats.blogspot.pt/2015/11/more-55-incredible-boat.html
http://interestingsailboats.blogspot.pt/2016/11/more-about-more-55.html
Nice boats but not practical. Building system seems not to be the correct one. For this money, there are other shipyards with more guarantee. Only my opinion...
ReplyDeleteAnd what are they, for this price? I mean regarding the More 55? None offers a structural frame like this one and none offers Vacuum injection with vinylester resins. Sure, I hoped More 55 offered a sandwich hull and I don't believe that the boat does not flex, but the other mass production boats of this size do that to.
DeleteI am not sure that it is not better than the other mass production boats around and certainly it is faster. A bit of a disappointment to me however.
There are already some available on independent charter companies (besides the ones on More charter). Time will tell. If it is better we will see it selling in large numbers.
I expressed doubts, that's all. They have the means to better the boat and I really hope they do that since the hull design is great.
After having access to new information I have remade this post in quite an extensive way.
ReplyDeleteIn fact I was given wrong information at the 2017 Dusseldorf boat show by the More staff. It seems that the ones that were there were Charter operators and knew very little about how the boat was built.
The correct information changed substantially the way I reviewed the More 55.
Too much of Salona in this.
ReplyDeleteYes, but that is a good thing...except for Salona but that's their own fault. Here the story:
Delete"More Boats....began when More Charter, a half-Swedish and half-Croatian owned company approached Solana Yachts where from their charter fleet was usually sourced, to construct a new 55ft boat.
More Charter would have paid in advance for a dozen boats if Salona had been able to offer the type of boat More Charter required, but the deal was not concluded. More Charter were not going to give up on their requirement for a 55ft design, so instead took the surprising decision to found More Yachts.
The new company was put to work immediately, with the former shipyard foreman from Salona orchestrating the direction of the yard and Maurizio Cossutti, who was the designer of the Salona range designing the new More 55. Within just a few months production began with a run of seven new More 55’s.
News of the new More 55 spread quickly and buyers began to arrive. The initial run of seven More 55’s quickly became 12, then 15 and then 18 new builds.
Every time the shipyard owner’s reported that the new boats were finished and focus would shift to marketing the brand to make themselves better known in new markets, a new wave of orders would come in and the orders books would be full once more.
And so, after just two years from the birth of More Boats, still nobody knows anything about the brand, despite it now being the most productive yacht builder in Croatia."
http://www.grabauinternational.com/news/the-more-boats-success-story/
Would be interesting to post an article about the Bavaria c line as I see lot of similarities... Same designers...
ReplyDeleteFor instance, could we consider the Bavaria C57 the comfortable sibling of the More 55?
No, even if the Bavaria C57 has a much nicer interior all the rest is much superior on the More 55: They use only vinilester resins, it is a full cored boat, it has an inox backbone and the B/D has nothing to do.
DeleteThe only one that you can compare in building is the C65 (that has as base a Salona 60), except in what regards B/D (the More 55 has a much bigger B/D ).
The displacement of the C57 is 17T, the one of the C65 is 25T but the diference in price is much bigger than what that diference in displacement may suggest: 374 900 to 1.1 million (both boats without VAT and at the factory). That will tell you something about the building diferences that reflects the difference in price. ;-)
The More 55 could have a different interior as option something like this (Solaris 55):
http://www.segelfelix.de/wp-content/uploads/2017/01/Dinette_2_1484400831056644700.jpg
That would make it a much better and nicer one.
ReplyDeleteWonderful post. Its really helpful for me..
mykonos villas with private pool
mykonos yacht booking